Haggie Reid Pty Ltd
Winder Ropes

Made to your requirements

Virtually every Haggie rope installed on a winder is selected from an available design but is custom manufactured to the unique requirements of that winder.

Here are some of the important criteria when selecting or designing a rope for a given shaft installation.

  • Type of winder and intended duty
  • Shaft type – vertical or incline
  • Depth of wind
  • Conveyance guide system
  • Mass of conveyance plus mass of payload
  • Sheave and drum dimensions
  • Headgear and deflection sheave diameters
  • Fleet angles
  • Support rollers dimensions (incline shafts)
  • Propensity for rope oscillation – position of winder in relation to shaft
  • Drum type and coiling method
  • Required statutory factors of safety
  • Required breaking force
  • Installation and maintenance requirements
  • Environmental conditions – corrosive or non-corrosive
  • Acceleration and deceleration speed
  • Static and dynamic load range (Friction winders)
  • Drum tread material (Friction winders)

As there are often compromises needed in the design criteria, Haggie Reid engineers should be consulted before making a winder rope selection.

Typical cross sections of Haggie winder rope product range






Typical rope winder applications and recommended Haggie rope constructions

FC=Fibre Core LL=Lang’s Lay
OL=Ordinary Lay T=Triangular strand
N/S=Non spin or rotation resistant rope C=Compacted strand
WMC=Wire Main Core UHP=Ultra high performance grade
WINDER APPLICATIONROPE CODEROPE CONSTRUCTION

Small drum winder operating in vertical shaft at less than 2.5m/sec with fixed guides

A17 K05

6x19(9/9/1)/FC LL
6x13(7/6T)/FC LL

Small drum winder operating in vertical shaft with rope guides

T30 U40

18 strand N/S LL 12x7C(6/1)6x7(6/1)/F
18 strand N/S C OL 12x7C(6/1)6x7C(6/1)/ WMC UHP

Large drum winder operating in an incline shaft

J

Compound triangular strand LL with largest practical outer wire sizes

Large drum winder operating in vertical shaft with fixed guides

J

Compound triangular strand LL with outer wires of typically 3.2mm in diameter

Large drum winder operating in vertical shaft with rope guides

P11 P18

15 strand “Fishback” N/S 9x10(8/2)/6x14(8/6T)/WMC
18 Strand “Fishback” N/S 12/10(8/2)/6x29(11/12/6T)

Blair Multi Rope Winder

J

Compound triangular strand LL rope

Koepe Friction winder to depth 500m

A40 A48 A60 P11

6x25(12/6F)/F OL
6x26C(10/5+5/5/1)/F UHP
6x36(14/7+7/7/1)/F OL
15 strand “Fishback” N/S 9x10(8/2)/6x14(8/6T)/WMC

Koepe Friction winder operating at depth range 500m to 1000m

U30 U40 P11

18 strand N/S OL (12x7(6/1)/6x7(6/1)/FC
18 strand N/S 12x7C(6/1)/6x7C9^/1)/WMC UHP
15 strand “Fishback” N/S 9x10(8/2)/6x14(8/6T)/WMC

Koepe Friction winder operating at depth range 1000m to 2000m

P18 V68 P11

18 strand “Fishback” N/S 12x10(8/2)/6x29(11/12/6) WMC
34 LR UHP16x19(9/9/1)/6x19C(9/9/1)+6x19C(9/9/1)/6x19C(9/9/1)/WMC UHP 15 strand “Fishback” N/S 9x10(8/2)/6x14(8/6T)/WMC

Tail or Balance Rope

S25 P06

17 strand N/S 11x19(9/9/1)/6x19(9/9/1)/6x7(6/1)/F
14 strand N/S 8x8/6x27(9/12/6T)WMC

Sinking stage winder

O05 O09 P11 P18

14 strand N/S 8x6/^x10(7/3T)/WMC
15 strand N/S 9x6/6x10(7/3T)/WMC
15 strand “Fishback” N/S 9x10(8/2)/6x14(8/6T)/WMC
18 strand “Fishback” N/S 12x10(8/2)/6x29(11/12/6) WMC (Rope mass 100t+)

Kibble wider for short winding distance and rope diameter less than 42mm

O09

15 strand N/S 9x6/6x10(7/3T)/WMC

Kibble wider for deep winding distance and rope diameter greater than 42mm

O10 P18

15 strand N/S 9x6/6x10(7/3T)/FC
18 Strand “Fishback” N/S 12/10(8/2)/6x29(11/12/6T)

Guide Ropes

M41

Half Locked 1x41(11+11/12/6/1)

Copyright 2024 Haggie Reid Pty Ltd   |   All Rights Reserved   |   View our Privacy Policy